+1 (630) 963-0320
Contact

Tag: Temporary

Browns Ferry 360-Inspection Platform

Browns Ferry needed durable and effective floor shielding for the trough of their 360 cavity inspection platform. Like with most floor shielding applications, T-Flex® Bismuth was chosen because of its great attenuation properties relative to its cost. On top of the Bismuth shielding was a yellow slip-resistant tread surface to ensure workers would be able […]

Vogtle Reactor Head Shielding

In 2021, Vogtle reached out to NPO to help develop a new shielding package for around the reactor head. Their current system consisted of two rings: one under the head, and one around the outside of the head. Each of these shield rings used 1’ x 6’ (305 mm x 1829 mm) 60 lb (27.2 […]

Oconee Reactor Head T-Flex Shielding

Reactor head shielding is an essential part of every refuel outage. Oconee Nuclear Station sought to upgrade the shielding used at the bottom of the reactor head, opting to use lead-free T-Flex Bismuth blankets. Specifically designed for the application, these blankets T-Flex blankets were covered in blue PVC with Oconee specified printing that clearly indicated […]

Pressurizer Spray Line Shielding

  South Texas Project required new shielding for a section of the pressurizer spray line. Though the area looks small, the total shield weight was around 850 lb (386 kg). This was due to the 6.5″ (165 mm) diameter of the pipe and the 1.5″ (38 mm) thick shielding pieces. But despite the size and […]

T-Flex Blankets

How many lead wool blankets does your site deploy every outage? Despite best efforts, do your lead blankets look sloppy while draped over pipes and hot spots or seem mashed and bent around corners and tight spaces? How long have they been there?  How are they handling the use and abuse? Lead wool blankets, while […]

Magnetic ARGOS Booth Shielding

Byron had an issue with an ARGOS Zeus unit in the main exit area of the RCA. Background gamma radiation from a line in the overhead was shining down and causing false alarms on the gamma detectors to the point of making the unit inoperable. Due to the position of the Argos unit it was […]

Boiler Plate Shields

Inside the steam generators of CANDU nuclear power plants, a divider plate separates the hot leg from the cold leg. Dozens of bolts hold this divider plate together, and these bolts trap hot particles that are a major source of radiation during inspections. NPO designed magnetic shielding designed to fit around each bolt. Since it […]

Dry Cask Shielding Package

In 2019, Davis-Besse Nuclear Power Station, purchased an array of shielding from NPO for their spent fuel storage campaign. This package included a transfer cask shield bell, canister shield ring, and annulus gap shielding. All of these items contributed to greatly reduced dose rates for both gamma and neutron radiation. Shield bells are a single-pick […]

Vertical Storage Cask Gap Shielding

“Discrete exposure savings listed at 41 mrem [410 μSv]. However, the shielding also provided critical radiological configuration control during this high profile first time evolution.” -Timothy Bigler, Point Beach Nuclear Point Beach was set to perform a Vertical Storage Cask inspection and required shielding for the VCC/MSB gap created when the shield ring was removed. […]

Reactor Head Flange Shielding

TVA Sequoyah needed a way to shield the surrounding area of their reactor head while inspection work was being done. To avoid setting up scaffolding or stand alone lead blanket racks that would take up valuable floor space, NPO designed lead blanket racks that would make use of the stud holes of the reactor head […]
Load More

Categories

NPO has supplied products and services since 1976 that address ALARA needs worldwide in the areas of radiation shielding and contamination control.

©2024 Eichrom Technologies, LLC
eichrom is a brand of Eichrom Technologies, LLC
Privacy Policy

PRODUCTS

APPLICATIONS

TECHNICAL INFO

RESOURCES

+1 (630) 963-0320
Contact