Category: Pipe Shielding

Brunswick Permanent Valve Shield Box

Brunswick Nuclear Station had a valve that was causing a room to be a locked high radiation area. They wished to implement a permanent shielding package in order to down post the room. The valve was set to be removed during an upcoming outage. The Radiation Protection team reached out to NPO for a solution. […]

Pressurizer Spray Line Shielding

  South Texas Project required new shielding for a section of the pressurizer spray line. Though the area looks small, the total shield weight was around 850 lb (386 kg). This was due to the 6.5″ (165 mm) diameter of the pipe and the 1.5″ (38 mm) thick shielding pieces. But despite the size and […]

Permanent Pipe Shielding for Davis-Besse

NPO was brought on to provide shielding for Mechanical Penetrations Room No. 1 at Davis-Besse. This room featured a variety of pipe runs with many valves, bends, and reductions throughout as well as many hot spots. Using a combination of drawing information and practical measurements taken on site, NPO provided a shielding package using T-Flex […]

T-Flex Pipe and Valve Shields

T-Flex is the most versatile shielding material that NPO has to offer. Its ability to be poured as a liquid and cured as a flexible solid makes it ideal for fitting the maximum amount of shielding around a component while keeping space and weight to a minimum. The most common way this is put into […]